Quick answer
Calculate each footing section from its designed length, width and depth, then add the sections before converting to cubic yards.
Step by step
- List sections Separate strip footings, pads and steps.
- Measure dimensions Use the designed concrete dimensions.
- Calculate volumes Multiply length × width × depth for each section.
- Add together Convert the total to cubic yards and review ordering allowance.
Formula or rule of thumb
Example
Use the measured project dimensions, apply the product or layout assumptions, then round to the package or supplier unit.
Common mistakes
Do not hide waste, package coverage, product yield or site assumptions inside one unexplained number.
Planning note: product yields, installation methods, site conditions and local requirements can change the final quantity. Use the exact manufacturer or supplier information before purchasing.
FAQ
Is this a final quote?
No. It is an early planning estimate and should be checked against product specifications and local conditions.
Why do products differ?
Coverage, package size, installation method and material properties vary by product.
Should I confirm with a professional?
Yes when the work affects structure, waterproofing, roofing safety, utilities or code compliance.